How To Install WordPress On Ubuntu? (Correct answer)

First, we shall uncover the various steps for the installation of the LAMP stack before progressing to install WordPress.

  1. Step 1: Install Apache Web Server on Ubuntu.
  2. Step 2: Install MySQL Database Server.
  3. Step 3: Install PHP in Ubuntu.
  4. Step 4: Install WordPress in Ubuntu.
  5. Step 5: Create WordPress Database.

Contents

How do I install WordPress on Linux?

In general, the steps of the process are:

  1. Install LAMP.
  2. Install phpMyAdmin.
  3. Download & Unzip WordPress.
  4. Create a Database through phpMyAdmin.
  5. Give special permission to the WordPress directory.
  6. Install WordPress.

How do I install WordPress on a LAMP server?

How to install WordPress on Ubuntu 18.04 using a LAMP stack

  1. Step 1: Create a database for WordPress user.
  2. Step 2: Install additional PHP extensions.
  3. Step 3: Download WordPress.
  4. Step 4: Configure the WordPress directory.
  5. Step 5: Modify Apache configuration.
  6. Step 6: Run WordPress installation using the web browser.

How do I install WordPress on Apache?

Download and install WordPress

  1. Initial WordPress setup wizard.
  2. Fill out the MySQL database information we configured earlier.
  3. WordPress has successfully connected to our MySQL database.
  4. Fill out your site title, username, password, and email.
  5. WordPress has installed successfully. Click log in to find the admin menu.

Where is WordPress on Linux?

Install WordPress

  1. WordPress can be manually installed by downloading the.
  2. The installation places the files in the /usr/share/wordpress folder.
  3. Before running the mysql script described below you need to install MySQL if you don’t have it yet:

How do I download PHP on Ubuntu?

Installing PHP 7.3 on Ubuntu 18.04

  1. Start by enabling the Ondrej PHP repository: sudo apt install software-properties-common sudo add-apt-repository ppa:ondrej/php.
  2. Install PHP 7.3 and some of the most common PHP modules: sudo apt install php7.3 php7.3-common php7.3-opcache php7.3-cli php7.3-gd php7.3-curl php7.3-mysql.

How do I know if WordPress is installed on Ubuntu?

Login to wordpress >> Dashboard >> Updates >> here you can check the wordpress version. You can also update your wordpress version from here if you are not up to date. 2. Second, login to your wordpress dashboard as an admin; here you can see the current wordpress version at the footer or any page.

How do I install WooCommerce on Ubuntu?

Install WordPress WooCommerce Plugin on Ubuntu 17.04 | 17.10 with Apache2 Support

  1. STEP 1: PREPARE AND UPDATE UBUNTU.
  2. STEP 2: INSTALL APACHE2 WEB SERVER.
  3. STEP 3: INSTALL MARIADB DATABASE SERVER.
  4. STEP 4: INSTALL PHP AND RELATED MODULES.
  5. STEP 5: CREATE A BLANK WORDPRESS DATABASE.
  6. STEP 6: CONFIGURE THE NEW WORDPRESS SITE.

How do I install MySQL on Ubuntu?

Support Network

  1. Install MySQL. Install the MySQL server by using the Ubuntu operating system package manager: sudo apt-get update sudo apt-get install mysql-server.
  2. Allow remote access.
  3. Start the MySQL service.
  4. Launch at reboot.
  5. Configure interfaces.
  6. Start the mysql shell.
  7. Set the root password.
  8. View users.

How do I update WordPress on Ubuntu?

Howto update wordpress

  1. Step # 1: Backup existing database and wordpress directory. Type the following commands at shell prompt: $ mkdir /backup/wp/28nov2006.
  2. Step # 2: Download latest wordpress CMS. $ cd /tmp. $ wget http://wordpress.org/latest.zip.
  3. Step # 3: Overwrite all new files. $ cd /var/www/html/blog.

How do I download Apache server on Ubuntu?

How to Install Apache on Ubuntu

  1. Step 1: Install Apache. To install the Apache package on Ubuntu, use the command: sudo apt-get install apache2.
  2. Step 2: Verify Apache Installation. To verify Apache was installed correctly, open a web browser and type in the address bar: http://local.server.ip.
  3. Step 3: Configure Your Firewall.

Can you host WordPress on Apache?

Creating Apache VirtualHost for WordPress Website Next, you need to configure Apache webserver to serve your WordPress site using your fully qualified domain name, by creating a Virtual Host for it under the Apache configuration.

Which Linux is best for WordPress?

Ubuntu is one of the best operating systems to run your WordPress site on.

How do I deploy WordPress?

Deploy a WordPress website

  1. Overview.
  2. Create an application on Clever Cloud.
  3. Setting up environment variables on Clever Cloud.
  4. Configure your WordPress application.
  5. Optimise and speed-up your WordPress.
  6. Environment injection.
  7. Linking a database or any other add-on to your application.
  8. Configure your database.

How do I run WordPress?

However, the first step should be a piece of cake.

  1. Download the WordPress. zip file.
  2. Create a WordPress database and user. Next, you’ll need to decide whether to create a WordPress database and user.
  3. Set up wp-config. php.
  4. Upload your WordPress files via FTP.
  5. Run the WordPress installer.

Install and configure WordPress

WordPress is the most widely used open-source blogging system and content management system (CMS) on the Internet. It is built on the PHP and MySQL programming languages. Thousands of free plugins and themes may be used to enhance the functionality of the platform. Installing WordPress on an Apache2 server and creating our first post are the objectives of this tutorial.

What you’ll learn

  • How to install WordPress
  • How to setup WordPress
  • How to customize WordPress
  • How to write your first blog article

What you’ll need

  • The following computers are required: Ubuntu Server 20.04 LTS
  • You will also learn how to set up a database for WordPress in this article.

Marcin Mikoajczak was the original author of this piece. Dani Llewellyn has made significant changes to this version.

2. Install Dependencies

Use the following command to install PHP and Apache on your computer: sudo apt update (update the package manager) apache2 ghostscript libapache2-mod-php mysql-server php-bcmath PHP-curl PHP-imagick php-intl php-mbstring php-mysql PHP-zip

3. Install WordPress

We shall use the release fromWordPress.org rather than the APT package in the Ubuntu Archive because this is the preferred way recommended by the WordPress upstream community for installing WordPress. This will also result in fewer “gotcha” difficulties that the WordPress support volunteers will not be able to predict and, as a result, will not be able to assist with as effectively. To get started, create a directory in your home directory and download the WordPress installation file from WordPress.org:sudo mkdir -p /srv/www sudo chown/srv/www curl|

When dealing with such cases, you should consider utilizing a single user per website and restricting access to the files to just those people who need to read and write to them.

A site owner and group should have readonly access to the wp-config.php file in such a configuration, and all other permissions should have no access.

While not covered in this tutorial, it is important to note that

4. Configure Apache for WordPress

Create a WordPress site on an Apache server. Create/etc/apache2/sites-available/wordpress.conf with the lines that follow: /srv/www/wordpress Directory /srv/Options VirtualHost *:80DocumentRoot /srv/www/wordpress FollowSymLinks AllowOverride Limit Options AllowOverride Limit Options FileInfo index.php is a directory index.php. All /DirectoryDirectory /srv/Options that have been given must be used. FollowSymLinks All /Directory/VirtualHost permissions must be met. With the command: sudo a2ensite, you may enable the site.

With the command: sudo a2dissite 000-default, you may disable the default “It Works” site.

This hostname must be mapped to your machine in some way, such as through DNS or by editing the /etc/hostsfile on the client systems (on Windows the equivalent isC:WindowsSystem32driversetchosts).

5. Configure database

We must first build a MySQL database in order to configure WordPress. Let’s get this party started! mysql -u root – sudo mysql -u root Thank you for visiting the MySQL monitor. Commands are terminated with; or g. Your MySQL connection id is 7 at this time. Version of the server: 5.7.20-0ubuntu0.16.04.1 (Ubuntu) Oracle and/or its affiliates retain ownership of the copyright until the year 2000. All intellectual property rights are retained. Oracle is a trademark of Oracle Corporation and/or its affiliates that is used under license.

Help can be obtained by typing ‘help;’ or ‘h’.

wordpressCREATE DATABASE mysql; wordpress 1 row has been impacted by the query (0,00 sec) sqlCREATE USER [email protected], IDENTIFIED BY’your-password ‘; query OK, 1 row impacted by the operation (0,00 sec) mysqlGRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP,ALTER -ON wordpress.* mysqlGRANT SELECT,INSERT,UPDATE,DELETE,CREATE,DROP,ALTER -ON wordpress.

the command mysql start

6. Configure WordPress to connect to the database

Now, let’s set up WordPress to make advantage of this new database. In order to get started, copy the sample configuration file towp-config.php using the following command: sudo -ucp /srv/ /srv/www/wordpress/wp-config.php After that, modify the configuration file to include the database credentials (do not alter database name here or username here in the instructions below). Doreplaceyour-passwordwith the password for your database.): sudo -used -i’s/database name here/wordpress/’ /srv/www/wordpress/wp-config.php /srv/www/wordpress/wp-config.php sudo -used -i’s/username here/wordpress/’ /srv/www/wordpress/wp-config.php /srv/www/wordpress/wp-config.php sudo -used -i’s/password here/ your-password /’ /srv/www/wordpress/wp-config.php /srv/www/wordpress/wp-config.php Finally, in a terminal session, open the WordPress configuration file in nano mode by typing sudo -unano /srv/www/wordpress/wp-config.php in the command line.

Look for the following: “put your unique phrase here”); “put your unique phrase here”); “put your unique phrase here”); “put your unique phrase here”); “loggd in key”; “put your unique phrase here”); “NONCE KEY”; “put your unique phrase here”); “put your unique phrase here”); “put your unique phrase here”); “put your unique phrase here”); “put your unique phrase here”); “put your unique phrase here”); “put your unique phrase here Deleting those lines will result in one line being deleted for each time you hit the key combination.

Then replace the content of with the content of.

This step is critical in ensuring that your website is not subject to assaults involving “known secrets.” The configuration file may be saved and closed by pressing the keysctrl + x followed byythenenter.

7. Configure WordPress

Launch your web browser. You will be asked for the title of your new website, as well as your username and password, as well as your e-mail address. Take note that the username and password you choose here are only for WordPress and do not grant access to any other parts of your server – choose username and password that are distinct from your MySQL (database) credentials, which we configured specifically for WordPress’ use, and that are distinct from your credentials for logging into your computer’s or server’s desktop or shell (if applicable).

You may choose whether or not you want your website to be indexed by search engines.

Several icons and settings will be available to you on the WordPress Dashboard screen.

8. Write your first post

You’ll see the “Hello, world!” entry on the blog. Let’s get rid of that and write something a little more fascinating. Select “Posts” from the Dashboard () and then “All Posts” from the drop-down menu. Select Trash by hovering your mouse cursor over the “Hello world!” post title. To create a new post, select “Add New” from the drop-down menu. If you look closely, you’ll see a beautiful WYSIWYG editor with straightforward (but powerful) text formatting choices. If you prefer pure HTML, you might want to try switching to Text mode.

It’s as simple as utilizing word processors that you’re already familiar with from office suites.

The link to your brand-new post is now active!

9. That’s all!

Of course, this lesson has just covered the fundamentals of WordPress usage; there is a lot more you can do with this blogging platform/content management system. You can choose from among the thousands of plugins and themes that are available (both free and commercially). In addition, you can use it as a forum (with thebbPressplugin), a microblogging platform (with BuddyPress), an eCommerce site (with WooCommerce), or you may enhance the functionality of current WordPress features using plugins like as JetPack or TinyMCE Advanced.

You may read it to learn more about WordPress usage and even a little bit about the creation of themes and plug-ins for WordPress.

Further reading:

  • Website for WordPress documentation
  • A page for WordPress in the Ubuntu documentation

Was this tutorial of use to you?

How To Install WordPress with LAMP on Ubuntu 18.04

This instruction was a big help, didn’t you think so?

Prerequisites

To complete this lesson, you will need the following materials:

  • Access to an Ubuntu 18.04 server through asudouser is granted as follows: To complete the steps in this article, you’ll need to log in as a non-root user with sudo rights. It is possible to establish a user with sudo rights by following the instructions in our Ubuntu 18.04 initial server setup guide. Install the LAMP stack: In order for WordPress to work properly, it will require a web server, a database, and PHP. All of these needs may be met by implementing a LAMP stack (Linux, Apache, MySQL, and PHP) on your computer. Follow the instructions in this manual to install and configure this software. Secure your website with SSL: WordPress is a content management system that provides dynamic material while also handling user authentication and authorization. Safe Sockets Layer (TLS)/SSL (Transport Layer Security) is the technology that allows you to encrypt traffic from your site in order to ensure that your connection is secure. The method by which you set up SSL will be determined by whether or not you have a domain name for your website.
  • If you have a domain name, one method of securing your site is to use Let’s Encrypt, which delivers free, trustworthy certificates to website owners. Make use of our Let’s Encrypt for Apache setup tutorial to complete this task. A self-signed certificate can be used in place of a domain certificate if you do not have one.or if you are simply using this setup for testing or personal reasons. This method provides the same type of encryption as the previous method, but does not require domain validation. Set up your self-signed SSL certificate for Apache by following our instructions.
You might be interested:  How To Remove Uncategorized Category In Wordpress? (Solution found)

You may use Let’s Encrypt to encrypt your website if you have a domain name, which gives free and reliable certificates. Install Let’s Encrypt for Apache by following our instructions. A self-signed certificate can be used in place of a domain certificate if you do not have one.or if you are only using this setup for testing or personal usage.

There is no domain validation in this case, but the encryption is the same. Step by step instructions on how to install a self-signed SSL certificate on Apache.

Step 1 – Creating a MySQL Database and User for WordPress

Let’s Encrypt, which gives free, trustworthy certificates, is a good option if you have a domain name. Set this up by following our Let’s Encrypt instructions for Apache. A self-signed certificate can be used in place of a domain certificate if you do not have one.or if you are simply using this setup for testing or personal purposes. This provides the same type of encryption as the previous method, but does not require domain validation. To get started, refer to our self-signed SSL documentation for Apache.

For yourrootuser, you can, however, use the following command and provide your password information when prompted: From there, you’ll build a new database that will be controlled by WordPress itself.

Create a database for WordPress by entering the following information into a text editor:

  1. Create a database in WordPress with the default character set of utf8 and the collation utf8 unicode ci

Please keep in mind that every MySQL statement must be terminated with a semi-colon (;). If you are experiencing any difficulties, double-check that this is the case as well. Following that, you’ll establish a distinct MySQL user account that will be used only for the purpose of working with the new database. A smart approach from a management and security aspect is to create databases and accounts that only perform a single purpose. For the sake of this guide, we will use the usernamewordpressuser as an example.

By using the following command, you may establish this account, assign it a password, and then provide it access to the database that you created.

  1. >GRANT ALL ONwordpress.* TO’ wordpressuser’@ ‘localhost’IDENTIFIED BY’ password
  2. “>

In order to guarantee that the current instance of MySQL is aware of the recent modifications you’ve made after creating this user, flush the privileges after creating the user: In order to guarantee that the current instance of MySQL is aware of the modifications you’ve made, flush the privileges after establishing this user: You now have a database and user account in MySQL that have been created exclusively for WordPress use.

Step 2 – Installing Additional PHP Extensions

When configuring your LAMP stack, you just needed to install a small number of extensions to enable PHP to interface with the MySQL database. WordPress, as well as many of its plugins, make use of PHP extensions that are not standard. First and foremost, make sure your package list is up to date: A small number of PHP extensions were necessary in order for your LAMP stack to interface with MySQL throughout the configuration process. PHP extensions are used by WordPress and a large number of its plugins.

  1. When configuring your LAMP stack, you just needed a small number of extensions to enable PHP to connect with MySQL. WordPress, as well as many of its plugins, make use of new PHP extension features. First, make sure your package list is up to date:

Note: Each WordPress plugin has its own set of prerequisites, which you can see here. Some of them may necessitate the installation of extra PHP packages. Check the documentation for your plugin to find out what PHP needs it has.

If they are accessible, they may be installed using the apta command as previously explained. Restart Apache so that the new extensions may be loaded in the following step. Restarting Apache is recommended if you are returning to this page to install further plugins:

In the following step, you’ll make some changes to the Apache settings to make it more secure.

Step 3 – Adjusting Apache’s Configuration to Allow for.htaccess Overrides and Rewrites

The use of.htaccess files to control some aspects of your website by default in WordPress, such as permalinks, plugins, and redirects, are examples of this. These.htaccessconfiguration files are used by the Apache web server to establish the rules that the web server must follow.htaccessconfiguration files But because.htaccess files are disabled by default in Apache, you’ll need to alter the Apache virtual host file for your website in order to make them work properly again. Open the virtual host file for your website in order to enable it:

  1. Sudonano/etc/apache2/sites-available/wordpress.conf

Sudonano/etc/apache2/sites-available/wordpress.conf; After that, you’ll test the settings to see if the modifications are effective. To make sure there aren’t any syntax mistakes before implementing the changes, do the following check: It is possible that the output will contain a message that looks somewhat like this: AH00558 is the output from apache2. Using the IP address 127.0.1.1, it was not possible to establish the fully qualified domain name of the server. Set the ‘ServerName’ directive to a global value to prevent this message from appearing.

TheServerName might be either the domain name or the IP address of your server.

As long as the output containsSyntax OK, you are set to move on with your work.

Step 4 – Downloading WordPress

Now that your server software has been setup, you can go ahead and download and install WordPress on your server. It is always suggested to download the most recent version of WordPress from the WordPress.org website for security reasons. To begin, change into a writable directory by following these steps: Then, using the following commands, you may download the compressed release: To create the WordPress directory structure, extract the compressed file as follows: You’ll be transferring these files into your document root in a moment or two.

You may create the file by using the following commands: Those files will be moved into your document root in a short while.

Start by executing the following commands:

  1. Cp /tmp/wordpress/wp-config-sample.php /tmp/wordpress/wp-config.php
  2. Cp /tmp/wordpress/wp-config.php

As a last step, establish theupgradedirectory so that WordPress will not encounter permissions difficulties when attempting to perform this task on its own following an update to its software: You may now copy the full contents of the directory into your document root directory, if necessary.

The addition of a dot at the end of your source directory indicates that everything included within the directory, including hidden files, should be copied (like the.htaccessfile you created). In place of the highlighted example, use the name of your real document root to complete the sentence:

Following that, you’ll need to make adjustments and configurations to the files and folders in your WordPress directory.

Step 5 – Configuring the WordPress Directory

In order to proceed with the web-based WordPress installation, you must first make certain changes to the WordPress directory.

Adjusting the Ownership and Permissions

One of the most important tasks you have to complete is establishing acceptable file permissions and ownership for your files. To begin, give the and group ownership of all of the files in the system. In order to serve the website and execute automatic updates, the Apache web server must be granted access to WordPress files by this user. Apache must be granted access to WordPress files in order for the website to function properly. Withchown, you can change who owns what. After that, run two findcommands to ensure that the WordPress folders and files have the proper permissions:

  1. Run the following findcommands to ensure that the WordPress folders and files have the proper permissions:

To begin with, these should be legitimate permissions that have been specified. Some plugins and methods may necessitate extra customizations.

Setting up the WordPress Configuration File

You will now need to make some modifications to the WordPress configuration file, which is located in the root directory. You will need to make some changes to certain secret keys as soon as you open the file to ensure that it is properly secured before you can begin installing it. In order to save you the trouble of trying to come up with suitable values on your own, WordPress includes a safe generator for these values. Because they are only used internally, having complicated, secure values here will not detract from the usability.

DON’T duplicate the values indicated in the example below; instead, make your own.

xY”); define(‘LOGGED IN SALT’,’i/G2W7!-1H2OQ+t$3DO NOT COPY THESE VALUESC-?y+K0DK +F|0h!

Make a copy of the output that you got. Open the WordPress configuration file at this point. Take special care to make sure that the file path corresponds to your own document root, which is shown in the following:

Upon receipt of your unique values, they will appear somewhat like this: Precaution:It is critical that you request different values each time you seek information. DO NOT duplicate the values displayed in the example below. Instead, use your own values. Output create a new define(‘AUTH KEY’,’1jl/vqfs XhdXoAPz9′, ‘1jl/vqfs XhdXoAPz9’, ‘1jl/vqfs XhdXoAPz9’, ‘1jl/vqfs XhdXoAPz9’, ‘1jl/vqfs XhdXo NONE OF THESE VALUES SHOULD BE COPIEDc jiwqD+c9.k [email protected]’); def(‘SECURE AUTH KEY’,’E2N-h2]Dcvp+aS/p7X’, ‘E2N-h2]Dcvp+aS/p7X’); define(‘SECURE AUTH KEY’,’E2N-h2] NONE OF THESE VALUES SHOULD BE COPIED)CgLi-3′); define(“LOGGED IN KEY”); define(“LOGGED-IN KEY”); define(“LOGGED-IN KEY”); define(“LOGGED-IN KEY”); define(“LOGGED-IN KEY”); JF NOTE: DO NOT COPY THESE VALUES2;y,2m percent 3]R6DUth[;88′); define(‘NONCE KEY”); define(‘NONCE KEY’,’ll,4UC)7ua+8!4VM+); define(‘NONCE KEY’,’ll,4UC)7ua+8!4VM+); define(‘NONCE KEY’,’ll,4UC) Do not copy the values ‘DXF+[$atzM7 o-C7g’ and ‘DXF+[$atzM7 o-C7g’); define(‘AUTH SALT’, ‘koMrurzOA+|L lGkfDo not copy the values ‘DXF+[$atzM7 o-C7g’); do not copy the values ‘DXF + [$atzM 07VC*Lj*lD?3w!BT -‘); define(‘SECURE AUTH SALT’, ‘p32*p,]z percent LZ+pAu:VYDO NOT COPY THESE VALUESC-?y+K0DK +F|0h!

xY’); define(‘LOGGED IN SALT’,’i/G2W7!-1H2OQ+t$3DO NOT These are configuration lines that you may copy and paste right into your configuration file in order to set secure keys for your settings.

Now, open the WordPress configuration file in your preferred text editor.

Step 6 – Completing the Installation Through the Web Interface

Now that the server configuration has been completed, you may proceed to the next step: completing the installation using the web interface. Navigate to the following address in your web browser: domain.com or public IP address of your server: server domain or IPSelect the language you would like to use: server domain or IPSelect the language you would like to use: Following that, you will be sent to the main setup page. For security reasons, it is not suggested to use a username such as “admin” for your WordPress site.

Automatically generated strong passwords are created.

Enter your email address and choose whether or not you want search engines to avoid indexing your site by selecting one of the options below: Following your next click, you will be sent to a screen that will urge you to log in: After logging in, you will be directed to the WordPress administrative dashboard, which looks like this: You may then start using and modifying your WordPress website from there.

Conclusion

WordPress should now have been successfully installed and be ready to be used by everyone. Following that, you might want to consider changing the permalinks for your posts (which can be located inSettingsPermalinks) or picking a different theme (inAppearanceThemes).

If this is your first time using WordPress, take some time to get familiar with the interface and the functionality of your new content management system.

How to Install WordPress Ubuntu Using LAMP Stack

The use of content management systems (CMSs) such as WordPress, which allow you to build up blogs as well as whole websites with a few simple clicks, is becoming increasingly popular among individuals who cannot afford the time-consuming process of constructing websites from scratch. WordPress is a sophisticated, free, and open-source content management system (CMS) that is extremely pluggable and adaptable, and is used by millions of people across the world to host blogs and fully working websites.

Because there are millions of plugins and themes available, all of which have been built by a vibrant and committed community of fellow users and developers, you can easily customize your blog or website to operate and look exactly as you want it to.

Requirements:

  • Linode hosting, which gives a free $100 credit to check it out, is a good choice for a dedicated Ubuntu server with an associated domain name. I recommend it.

In this post, we’ll walk you through the many steps you may take to install the current version of WordPress on Ubuntu 20.04, Ubuntu 18.04, and Ubuntu 16.04 with the LAMP (Linux, Apache, MySQL, and PHP) stack on each of the three Ubuntu operating systems.

Install LAMP Stack on Ubuntu Server

First, we’ll go over the different processes involved in setting up the LAMP stack, and then we’ll go on to the process of installing WordPress.

Step 1: Install Apache Web Server on Ubuntu

The following instructions will first update and upgrade the software package list, after which they will be used to install the Apachewebserver. Update your software with sudo apt-get update Upgrade your software using sudo apt-get upgrade apache2 may be installed with sudo apt-get install apache2. apache2-utils Ubuntu may be configured to run Apache. We need to enable the Apache2web server to start automatically at system boot time, as well as start the service and check its status as described in the following sections: enable apache2 $ sudo systemctl enable apache2 apache2 should be started using sudo systemctl start apache2.

  • You must then allow HTTP traffic on your UFW firewall after you have launched Apache.
  • $ sudo ufw allow in the directory “Apache” $ sudo ufw status $ sudo ufw status UFW Firewall should be configured to allow access to the Apache web server.
  • OR In the event that the webserver is up and operating, the Apache2 default index page will be shown.
  • Note: The Apache default root directory is /var/, and it is in this area that all of your web pages will be kept.

Step 2: Install MySQL Database Server

The following instructions will first update and upgrade the software package list, after which they will be used to install the Apache webserver. apt-get update -y sudo apt-get upgrade -y sudo apache2 may be installed using sudo apt-get install. apache2-utils Ubuntu may be configured to run Apache by following these steps. To have the Apache2web server start automatically upon system startup, we must first enable it to do so, then start it and check its status as follows: enable apache2 sudo systemctl enable apache2 start apache2 with sudo systemctl Apache2 is currently up and running using the command sudo systemctl status apache2.

You must then allow HTTP traffic on your UFW firewall after you have launched Apache.

in “Apache”: $ sudo ufw allow UFW status may be obtained by running sudo ufw status.

Open your web browser and type the following URL into the address bar to see if the Apache server is up and running.

OR As long as the WebServer is operational, the default index page for Apache2 will be shown. If you are using Ubuntu, the default Apache page is Reminder: The /var/ folder contains all of your web files by default, as defined by the Apache configuration.

Step 3: Install PHP in Ubuntu

We will also install PHP and a few modules to enable it to communicate with the web and database servers. To do so, use the command below: php install install php using sudo apt-get install php mod php php-mysql curl php-gd php-mbstring php-xml php-xmlrpc SOAP php-zip php-intl libapache2-mod php php-mysql curl php-gd curl gd php-mbstring php-mbstring PHP must be installed in Ubuntu. Once PHP and all essential extensions have been installed, you must restart Apache in order for the new extensions to take effect.

You might be interested:  How To Install Wordpress Plugin Manually? (Best solution)

?phpphpinfo();?phpphpinfo();?

Alternatively, you should be able to access the php information page provided below as validation.

Step 4: Install WordPress in Ubuntu

Download the most recent version of the WordPress package and extract it using the commands shown below, which should be entered into the terminal: wget -c wget -c wget -c wget -c $ tar -xzvf latest.tar.gz latest.tar.gz Move the WordPress files from the extracted folder to the Apache default root directory, and then restart the web server. sudo mv wordpress/* /var/www/html/ /var/www/html/ /var/www/html/ Next, make sure that the website directory has the necessary permissions, which means that the webserver should have ownership of the WordPress files.

Step 5: Create WordPress Database

To access the MySQL shell, run the following command and provide the root user password, then press Enter to proceed to the MySQL shell: mysql -u root -p $ sudo mysql -u root -p Enter the following lines into the mysql shell, hitting Enter after each line containing a mysql command, to create a database. Don’t forget to use your own, legitimate values fordatabase name and database user, as well as a strong and secure password fordatabaseuser password. mysqlCREATE DATABASE wp myblog;mysqlCREATE USER ‘username’@’ percent’IDENTIFIED WITH mysql native password; mysqlCREATE USER ‘username’@’ percent’IDENTIFIED WITH mysql native password WHEN USING THE PASSWORD;mysqlGRANT ALL ON wp myblog.

Move existingwp-config-sample.php to the /var/ directory and change it to wowp-config.php Also, make certain that the default Apache index page is removed.

Open your web browser and type in your domain name or server address in the appropriate field as displayed.

Read over the page and then click on “Let’s go!” to progress to the next step, where you will be required to fill out all of the on-screen information.

Please use the comments area below to contact us if you have any problems, questions, or further information about the processes outlined above, or if you have any other information that you believe should have been included but was not.

How to Install WordPress with LAMP on Ubuntu 20.04

WordPress is without a doubt the most widely used Content Management System. The WordPress platform is capable of hosting just about anything, from basic portfolio websites, corporate landing pages, and blogs, to full-fledged eCommerce websites. It ensures the flexibility, resilience, and security that are essential for the success of any website. WordPress is simple to download and set up if you understand how. When you have it installed on your server, you will be able to do the majority of the management chores via the web frontend.

Most of the time, these software components are grouped together to form a stack.

The LAMP stack is a web development stack that is quite popular in the industry.

Let’s get this party started!

First things first

This guide assumes that you have an Ubuntu 20.04 installation on your computer. Following our instructions on setting up an Ubuntu server will make it simple for you to setup your server. Create a sudo user on your Ubuntu 20.04 server first by logging in with your account. This is the user account that we will be creating in order to install the essential programs and applications as we progress through the course. Following that, you must configure the LAMP stack. A web server will be necessary due to the fact that you will be hosting a whole website that will include dynamic data.

  1. Our dynamic data will be stored in a MySQL database, and PHP will be used to process the data.
  2. Following our LAMP stack setup guide, you will be able to quickly and simply configure the LAMP stack.
  3. It is critical to protect any website that handles dynamic content or user authentication with an SSL certificate in order to prevent data theft.
  4. Let’s Encrypt provides a free SSL certificate that you may use to protect your website.
  5. Self-signing your certificate is an option for those who do not have a domain name yet.

However, you should be prepared to get browser warnings. At this point, you should have a fully functional Apache server with SSL installed and operational. Let’s get started with the WordPress installation process now!

Step 1: Set up a New MySQL Database and User for WordPress.

The very first step in setting up a WordPress site is to build a database, which will be used by WordPress to store and manage the site’s and its users’ information. Due to time constraints, we will not go over the procedures of installing and configuring the MySQL program itself, since we have already covered it in the LAMP stack lesson. We will, however, require a database as well as a user who will be used by WordPress to log into the database. By putting the following commands into your terminal, you may log in to the MySQL root account: Next, to log in, type the root password you created when installing MySQL for the first time and press enter to complete the process.

It is entirely up to you what name you give the database, but for the sake of this tutorial, we will refer to it as wordpress.

Keep in mind that the SQL query must be terminated with a semicolon.

CREATEDATABASEwordpressDEFAULTCHARACTERSETutf8COLLATEutf8_unicode_ci;

Now that we have a database, we will need to create a second user account that will be used to log into the database. When developing systems, it is always a good idea to adhere to the one-function rule. In this situation, there will be a single user who will only be able to access this one database. It makes things simpler from the standpoint of security and administration. This user can be referred to as wordpressuser. Choose a username that you’re comfortable with. This user must have full control over the data in the database, including the ability to create, read, edit, and delete records (CRUD).

Make sure to choose a strong password to replace the default one:

CREATEUSER’wordpressuser’@’localhost’IDENTIFIEDBY’password’;

The following step is to allow this user complete access to the WordPress database. Type the following command onto your computer:

GRANTALLONwordpress. *TO’wordpressuser’@’localhost’;

Once the user has been established and the appropriate permissions have been given, execute the following command to change the user’s login method from mysql native password to mysql native password. WordPress will be able to access the database if the following username and password combination is used:

ALTERUSER’wordpressuser’@’localhost’IDENTIFIEDWITHmysql_native_passwordBY’password’;

Finally, flush privileges are required in order for these modifications to take effect immediately: With the WordPress database and user created, we are ready to begin the WordPress installation procedure. By entering exit and pressing the enter key, you may quit the Mysql prompt:

Step 2: Configuring PHP to Work with WordPress Plugins

Of course, as part of the LAMP stack installation, you already have PHP installed, along with some of the essential extensions required to serve a web page and interface with a database such as MySQL. WordPress, on the other hand, need extra PHP extensions in order for its plugins to function properly. Before anything else, let’s update and install the necessary extensions with the help of the following command:

sudoaptupdatesudoaptinstallphp – curlphp – gdphp – mbstringphp – xmlphp – xmlrpcphp – soapphp – intlphp – zip

The PHP extensions that we have put here are for the WordPress installation at its most basic level. It’s possible that as you continue to work with WordPress, you’ll discover that you’ll want additional WordPress plugins. It is possible that some of these plugins will require you to install extra PHP extensions. When installing a plugin, you can always look at the documentation page for that particular plugin to learn more about the system requirements of that particular plugin. Once you’ve determined which PHP extension is necessary, you may install it using the apt command, as described before, by typing sudo apt install php extension name into your terminal.

It is necessary to restart the Apache server in order for the extensions to function properly. Type the following command onto your computer:

Step 3: Configuring Apache’s.htaccess to Handle Override and Rewrite Rules

In most cases, the.htaccess files are located in the root directory of a website. They include rules that Apache employs in order to send requests in the proper direction. WordPress makes use of its.htaccess file to control how files from its root directory and subsequent subdirectories are served by Apache. Virtual hosts allow you to host an infinite number of websites on a single server. Check read our guide on how to set up Apache Virtual Hosts in Ubuntu 20.04 if you want to learn more about virtual hosts.

  1. The 000-default.conf configuration file that comes with the Apache installation is already present in the directory.
  2. Because we are only hosting one website in this example, we can utilize this file without difficulty.
  3. It occurs when you visit to your site’s public IP address if you have a new LAMP installation since the default Apache welcome page is displayed.
  4. We will be replacing this file with the WordPress files, which can be found here:
Enable.htaccess Overrides.

By default, the.htaccess directory override is not enabled in the web browser. Directory overrides must be enabled in order for WordPress and its plugins to function properly. In most cases, this is done within the virtual host files. You may access the 000-default.conf configuration file in nano editor by running the following command:

sudonano/ etc / apache2 / sites – available / 000 – default.conf

The default configuration file appears as follows, except the comments that are included with it:

VirtualHost *:[email protected]/ var // htmlErrorLog$/ error.logCustomLog$/ access.logcombined/ VirtualHost

It is necessary to include the AllowOverride directive within the Directory block, which points to the website’s document root. Add the directory block and make the necessary changes to the document root. The following should now appear in the configuration file:

VirtualHost *:[email protected]/ var // htmlErrorLog$/ error.logCustomLog$/ access.logcombinedDirectory/ var // htmlAllowOverrideAll/ Directory/ VirtualHost

To save the file, use the keys Ctrl + O and ENTER at the same time. To quit the editor, use Ctrl + X on your keyboard.

Enable the Rewrite Module.

WordPress has a permalink function that allows you to create attractive URLs that are optimized for search engines. They rely on an Apache module known as mod rewrite to function. It is possible to turn on the module by issuing the following command:

Test the Configuration Changes.

To ensure that everything continues to function properly following the modifications you have made, use the following command to test the modifications: If you notice that the syntax is correct, then we are good to go. if you notice something different, you will have to go back and repair any errors that you may have made in the configuration files, else you will have to start over.

Enable the Changes.

Enter the following command to restart Apache in order to make the new changes effective: Up until this point, our server has been configured to accept WordPress requests.

Step 4: Downloading WordPress

We may now proceed to download and install WordPress on our website. Our website’s document root will be located in the /var/ directory on our server. The default Apache welcome page will be replaced by our own. To begin, we must download WordPress from the WordPress.org website. Always download the most recent version of the software due to security issues and other changes. Type the following command to go to the writable temporary directory: cd writable tempdir The WordPress compressed file may be downloaded by using the following command: Enter the following command to extract files from the compressed tar file to complete the extraction process: Each of the files will be placed in the tmp folder under the WordPress directory.

Type the following command onto your computer: wp-config.php is the file that contains all of the WordPress configurations.

To copy this file, use the following command into your terminal:

cp/ tmp / wordpress / wp – config – sample.php/ tmp / wordpress / wp – config.php

When a vulnerability is detected, WordPress will typically provide an update or a security fix to the affected users. In most cases, this is dealt with first in the upgrades directory. If you want to avoid WordPress running into permission difficulties, you may create the directory using the following command: create-directory.php At the end of the process, the contents of the /tmp/wordpress directory must be copied into the /var/ directory. First, delete any files that could be present in that directory by following these steps: Because we are using the default Apache webroot, it is likely that the index.html file for the Apache welcome page is there.

The dot at the end of the source directory guarantees that all of the content of the directory gets copied, as seen below: The WordPress files should be visible when you go to the /var/ directory and display the contents of the directory, as seen in the picture below:

Step 5: Setting Up User Permissions and Database Credentials in the WordPress Directory

You must make a few configuration changes before you can use the web front-end management panel. These contain the directory ownership rights as well as the database user credential information.

Adjust Directory Ownership and Permissions.

The sudo user presently has ownership of the WordPress directory, and this is the default. The ownership of the file must be changed to theuser and group, which is the ownership used by the Apache web server. WordPress will be able to read and write files as a result of the ownership change, allowing it to correctly serve web pages and make automated updates as needed. It is possible to change the ownership by using the chown command. On your terminal, type the following into the text box: All of the subdirectories of the WordPress installation must have the appropriate permissions set in place.

It is possible to modify their permissions by using the search command, as demonstrated. Keep in mind to include the semicolon at the conclusion of the sentence to prevent making a mistake:

sudofind/ var // html /- typed- execchmod750;sudofind/ var // html /- typef- execchmod640;

WordPress may now be used in conjunction with the current updates. Some plugins may require tweaking, however you can simply find out about this by visiting the documentation page for the specific plugin.

Update the WordPress Configuration File

The wp-config.php file is the one we will be working with in this part, and it contains all of the essential configurations for running the WordPress website. In order to increase the security of the installation, we should first alter the secret keys. Instead of needing to construct your own keys, WordPress provides a secret key generator function that you may use to produce a set of keys that are very safe. It is possible to obtain them by using the following command: The wp-config.php file is the one we will be working with in this part, and it includes all of the configurations that are required to run the WordPress platform.

  • Instead of generating your own keys, WordPress provides a secret key generator function that you may use to produce a set of keys that are very safe.
  • Take a look through the book to discover the part that has the fake keys.
  • Remove the fake strings from the command line and replace them with the strings you copied from the command prompt.
  • The MySQL configuration section should be located at the beginning of the configuration file.
  • Finally, you must choose the mechanism that WordPress will use to write to the file system when it is enabled.
  • Furthermore, this is defined within the wp-config.php file.

Step 6: Finalize the Installation through the Web Frontend

Your WordPress installation should now be accessible directly on the web through your domain name or the server’s public IP address at this time, indicating that the server’s setting is complete. You should be able to see the WordPress installation page. Select your preferred language and proceed as follows: Following that, you will be given with the primary setup page, where you may choose the title of the site, as well as the username and password that will be used to connect into the administration dashboard.

You might be interested:  How To Write A Wordpress Plugin?

You’ve already been assigned a strong password by the system.

Save your work and move on: At the moment, WordPress is successfully installed, and the following page encourages you to log in: After logging in, you will be led to the WordPress administrative dashboard, which looks like this: Your homepage, which includes the default WordPress blog post, now appears as follows:

Conclusion

You have successfully completed this lesson by configuring a LAMP stack and installing a WordPress site. This is a significant advancement since it now allows you to host any WordPress site in only a few minutes. The following stages involve investigating WordPressthemes that may improve the design of your site, WordPress plugins that may add functionality, and experimenting with a plethora of other things that you may do with WordPress. Good luck with your computing!

How to Install WordPress: Ubuntu 18.04 Using LAMP Stack

The 7th of February in the year 2022 Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonard Read WordPress is the most popular Content Management System (CMS) because of its user-friendliness and ability to develop a wide range of different types of websites with ease.

In addition, the program may be installed on a variety of hosting platforms, including a Virtual Private Server (VPS).

Using the LAMP stack, this article will walk you through the process of installing and setting WordPress on Ubuntu 18.04, from installing the Apache web server to configuring WordPress using a web browser.

See ourPuTTY guide for instructions on how to achieve this.

Pro Tip

The seventh of February in the year 2022. 8 minutes and 8 seconds, Leonardus N.8 minutes and 8 seconds, and Leonardus N.8 minutes and 8 seconds, and Leonardus N.8 minutes and 8 seconds, and Leonardus N.8 minutes and 8 seconds, and Leonardus N.8 minutes and 8 seconds, and Leonardus N.8 minutes and 8 seconds, and Leonardus N.8 minutes and 8 seconds, and Leonardus N.8 minutes and 8 seconds, and Leonardus N.8 minutes and 8 seconds, and Leonardus N.8 minutes and eight Read The fact that WordPress is the most popular Content Management System (CMS) is due to its user-friendliness and ability to develop websites of any type.

Also available for installation are other forms of hosting, such as a Virtual Private Server (VPS) (VPS).

In situations when you require total control over the WordPress back-end, this strategy is the best choice.

Firstly, you will want an SSH client in order to connect to the virtual private server (VPS). For more information, see ourPuTTY tutorial.

Step 1. Install and Configure the Apache Web Server

7:00 a.m. on February 7, 2022 Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “Leonardus N.8min is a Latin phrase that means “leonard Read WordPress is the most popular Content Management System (CMS) because of its user-friendliness and flexibility in terms of creating all types of websites.

A Virtual Private Server (VPS) is one sort of hosting where the software may be deployed (VPS).

It is recommended that you use this strategy when you require total control over the WordPress back-end.

Before we begin, you’ll need to connect to your VPS with an SSH client.

Step 2. Install PHP

PHP is required for WordPress in order to interface with the MySQL database and show dynamically generated content. Additionally, you will need to install extra PHP extensions in order to use WordPress. If you want to install PHP and PHP extensions at the same time, run the following command: PHP may be installed using sudo apt install php libapache2-mod-php php-mysql libapache2-mod-php PHP-curl, PHP-gd, PHP-xml, PHP-mbstring, and PHP-xmlrpc are all available. php-zip php-soap intl -y | php-intl -y When you request a directory without giving a filename, the index.html file will be given the highest priority and will be shown as a result of that priority.

  1. With order to open it in the Nano text editor, use the following command: the sudo nano command in the /etc/apache2/mods-enabled/dir.conf directory You should be able to observe the following: When you visit the website, the files will be resolved in the order of left to right.
  2. a.
  3. Once you’ve made the necessary changes, save the file and quit by hitting CTRL+X.
  4. It is necessary to restart the Apache2 web server in order for the modifications to take effect.
  5. Create a test PHP file in the web root directory to see if PHP is functional and can be used.

Now, navigate to the file using your web browser to access it. You should look at the following PHP information page:

Pro Tip

When communicating with the MySQL database and displaying dynamic information, PHP is required by WordPress. Additional PHP extensions for WordPress will also need to be installed. To install PHP and PHP extensions at the same time, run the following command: apt-get install php sudo apt-get install apache2 mod-php mysqli libapache2 mod-php php CURL, GDD, PHP-XML, Mbstring, PHP-XMLRPC are all examples of PHP extensions that may be found on this page. php-zip php-soap In this case, php-intl is the command to use.

  1. The priority order can be modified in thedir.conffile.
  2. Here’s what you should look for: As soon as you visit the website, the files will be resolved in the order they were saved.
  3. Suppose you want index.php to have a higher priority than index.html; simply relocate index.php to the left of index.html and you’ll get your desired outcome.
  4. After that, press Y to save your modifications and Enter to exit the program.
  5. You may accomplish this by using the following command: restart apache2 with sudo systemctl Set up a test PHP file in the web root directory to see if PHP is functioning properly.
  6. Now, navigate to the file using your web browser to access it.

Step 3. Configure MySQL and Create a Database

Installing the MySQL database is the next step after getting Apache up and running. Run the following command to accomplish this: installation of mysql-server using the -y flag It will be essential to input your password at some point in time. When prompted, hit YandEnter to finish the installation process. After you have successfully installed MySQL on your virtual private server, start the MySQL console by running the following command: sudo mysql Using the following command, you may change the password for the MySQL root account: Using mysql native password, you may alter the user ‘root’@’localhost’ who has access to the database.

To put these modifications into effect, execute theflushcommand: ACCESS TO mysqlFLUSH PRIVILEGES; To establish a WordPress database, run the following command on your computer: mysqlCREATE DATABASE is a SQL command.

utf8 unicode ci; We’ll now establish a MySQL user account that will be able to access the new WordPress database.

Please ensure that you use a strong password in place of ‘newpassword’ when sending emails to ‘testhostinger’@’localhost.’ * TO ‘testhostinger’@’localhost.’ Once you’ve finished, flush the privileges to ensure that MySQL takes note of the modifications.

ACCESS TO mysqlFLUSH PRIVILEGES; Finish by executing the command mysqlEXIT to shut down MySQL.

Step 4. Prepare to Install WordPress on Ubuntu

Preparing the WordPress installation involves establishing a WordPress configuration file as well as a WordPress directory on your computer. Creating a WordPress.conf configuration file Create aWordPress.confApache configuration file in the /etc/apache2/sites-available directory to get started with WordPress. Use the following command to get started: WordPress.conf is located at /etc/apache2/sites-available/WordPress.conf. Keep in mind that under Linux, the case of file and locale names is important to note.

  1. Enable.htaccess by adding the following lines to the VirtualHost block: Enable.htaccess Directories in the directory /var/AllowOverride All/Directory By using CTRL+X, you may close and save the file.
  2. Making a WordPress Directory is a simple process.
  3. In our case, the entire path will be /var/, as seen below.
  4. Using the WordPress permalink function is as simple as executing the following command in a terminal: a2enmod rewrite (without quotes) You’ll need to restart the Apache web server by entering the following command into the command prompt: apache2 should be restarted with systemctl.

The file may be accessed by running the following command: nano /etc/apache2/apache2.conf To point the ServerNamedirective to the server’s IP address or hostname, you’ll need at modify the /etc/apache2/apache2.conffile by adding the following line to the end of it: Your IP address is represented by the name of the server.

To verify that the Apache setup is accurate, execute the following command on the terminal and examine the output.

Step 5. Download and Configure WordPress

It is now time to install WordPress after all of the necessary preparations have been completed. Both web-based and manual modification of thewp-config.php file are viable options for configuring WordPress in two different ways.

Method 1. Configuring WordPress via a Browser

Install thewgetpackage on your virtual private server (VPS). This will come in handy while downloading WordPress files from the internet. Execute the following command on the command line: wget -y can be installed with sudo apt install wget. Use the wget command, followed by the WordPress download URL, to complete the process: wget As soon as you have received the archive file, you need run the following instructions to install the unzip utility: the following command: sudo apt install unzip -y You will need to relocate the file to the relevant location before you can unzip it at this point.

grep wordpress/*./ The final step is to delete the file index.html.

Once it is completed, restart Apache by issuing the following commands: sudo systemctl restart apache2sudo chown -R/var/sudo chown -R/var/sudo systemctl restart apache2 Finish things off by configuring WordPress using a web browser.

The procedures that follow will be identical to those that are required for a regular WordPress installation.

AWelcome to WordPressmessage will display, which will provide all of the information you’ll need to finish the installation. In order to proceed, click on theLet’s go!button. It will direct you to the main configuration page. Fill in the blanks with the following information:

  • Database name– this is the name that you assigned to the WordPress database when it was initially configured. In this scenario, the database will be called WordPressDB. The MySQL username that you created for the database previously should be entered here: Username Username and password– enter the username and password you generated for the database user
  • Keep the default value of localhosthere for the database host. Leavewp as the table prefix in this field.

To proceed, click on the Submit button. WordPress will now be able to connect with your database, according to a new notification that will show. The installation will begin when you clickRun the installation. Following that, you’ll be need to input some further information:

  • Site title– enter the name of your WordPress website here. We propose that you enter the domain name of your website in order to improve it. Name– establish a new username that you will use to log into WordPress. a password for the WordPress user should be created
  • Your email address– enter the email address where you would like to receive updates and alerts. Uncheck this option if you do not want search engines to index your site until it is complete
  • Otherwise, tick this box.

To complete the installation, click theInstall WordPressbutton. A notification indicating success will display, along with a login button. You will be able to access WordPress directly from this page. You will be brought to the WordPress administrative dashboard after you have successfully logged in. Installing WordPress plugins and themes will allow you to begin customizing your website right away. If your WordPress site does not yet have a domain name, you should acquire one and point the domain name to the VPS before making the website available to visitors.

Method 2. Manually Editing the wp-config.php File

Alternately, you may manually alter thewp-config.php file to install WordPress on your site. To update your current working directory and download the WordPress archive file, use the following instructions in your terminal: To extract the archive file, first change directory to /tmp and then execute the following command: tar xzvf latest.tar.gz latest.tar.gz latest.tar.gz Using the following command, create an a.htaccess file in the /tmpdirectory: edit /tmp/wordpress/.htaccess with nano When asked, save the file by pressingCTRL+Xand thenYandEnter.

You must now rename the WordPress sample configuration file that was previously created.

It may be renamed by using the following command: Copy the contents of /tmp/wordpress/wp-config-sample.php to /tmp/wordpress/wp-config.php and save it.

We can now copy the files into the document root directory, which is as follows: sudo cp -a /tmp/wordpress/.

Run the following command to alter the ownership: chown -R/var/ sudo chown Then, using the chmod command, modify the permissions of the directories and files as follows: sudo find /var/ -type d -exec chmod 750; sudo find /var/ -type f -exec chmod 640; sudo find /var/ -type d -exec chmod 750; sudo find /var/ -type f -exec chmod 640; sudo In addition to generating the WordPress salts, you’ll need to do so for the first configuration.

To accomplish this, use the following command: curl -s (curl -s) Each time this command is executed, it will generate a different salt value.

To open and modify the file, enter the following command: At the beginning of the /var/Thewp-config.phpfile are database setup settings, which may be found using nano.

define(‘DB NAME,’WordPressDB’); define(‘DB NAME,’WordPressDB’); /** MySQL database username */ define(‘DB USER’, ‘WordPressUser’); /** MySQL database password */ define(‘DB PASSWORD’, ‘DB Password’); /** MySQL database password */ define(‘DB PASSWORD’, ‘DB Password’); Finally, put the following technique at the bottom of the list: file system define(‘FS METHOD’, ‘direct’); define(‘FS METHOD’, ‘direct’); After making the necessary modifications, save the file.

Conclusion

WordPress is a popular content management system (CMS) that is good for website construction. If you have VPS hosting, installing WordPress and configuring it to use the LAMP stack is an excellent approach to power your site and access its back-end. Keep in mind that the sudo or root user is required for the installation procedure because it requires administrative access. Let’s go over the procedures to install the WordPress content management system on a server running Ubuntu 18.04:

  • Install Apache2 – this will act as the foundation for your web server
  • And Install PHP since WordPress will make use of it to connect with the database during the installation process. It’s important to remember to install the PHP extensions as well. Install MySQL, which will serve as the database for all of your WordPress files. Obtaining a WordPress directory and theWordPress.confare essential for the WordPress installation procedure
  • Preparing for WordPress installation Download and install WordPress on Ubuntu, and then complete the process by configuring your WordPress website.

We hope you have learned something new about installing and configuring WordPress on Ubuntu after reading this article. You are welcome to give it a go. Leave any questions you have in the comments area below. Thank you for reading. The author, Leo, works as a Digital Content Writer at Hostinger. He enjoys sharing his web hosting and WordPress skills with others in order to assist them in establishing a successful online presence. In his spare time, he enjoys listening to music and learning about audio engineering.

Leave a Comment

Your email address will not be published. Required fields are marked *